Is your sustainability report at risk of greenwashing? Find out with our free check.Report at risk of greenwashing? Request the free check
Back to the blogENVIFY JOURNAL
Methodology8 min read

Product LCA: what it is, who asks for it and where to start

Clients, tenders and new EU rules increasingly ask for the environmental impact of products. What an LCA is, how it differs from the carbon footprint, EPD and PEF, what data you need and where to start.

A product LCA, or life cycle assessment, measures the environmental impacts of a product across every stage of its life, from raw materials to end of life, following ISO 14040 and ISO 14044. Clients, public tenders and new EU rules ask for it more and more often, together with the carbon footprint and EPDs. To get started you need a clear goal and the production data your company already has.

What a product LCA is

LCA stands for Life Cycle Assessment. It is a standardised method for answering a simple question: how much does this product weigh on the environment, from the beginning to the end of its life? Unlike an organisation's carbon footprint, which measures the emissions of the whole company over a year, an LCA looks at a single product, expressed per functional unit: for example a kilo of product, a package or a square metre of flooring.

According to ISO 14040 an LCA study has four phases.

  1. Goal and scope. Why the study is done, for whom, on which product and within which boundaries.
  2. Inventory analysis. Collecting every input and output flow: materials, energy, transport, emissions, waste.
  3. Impact assessment. The flows become indicators, such as global warming in kg CO₂e or water use.
  4. Interpretation. Reading the results, identifying the highest-impact stages and checking the limits of the study.

Life cycle stages and study boundaries

A product's life cycle is usually split into five stages. Each needs different data, often held by different departments of the company.

StageWhat it coversTypical data
Raw materialsExtraction and production of materials and componentsBill of materials, weights, suppliers and origin
ProductionProcessing in the plant, energy, wasteEnergy and water use, production waste, packaging
DistributionTransport to clients and points of saleVehicles, distances, loads
UseWhat the product consumes during its service lifeEnergy or materials consumed, expected lifetime
End of lifeCollection, recycling, recovery or disposalRecycling and disposal scenarios for the product and its packaging

A study does not always cover every stage. It is called «cradle to gate» (from raw materials to the factory gate) when it stops there, as often happens for intermediate products, and «cradle to grave» (from raw materials to disposal) when it goes all the way to end of life. The choice of boundaries depends on who will use the result and for what.

LCA, carbon footprint, EPD and PEF: the differences

The acronyms look alike, but they meet different needs. Here is how to find your way.

ToolWhat it measuresReferenceWhen you need it
LCAAll the environmental impacts of the product: climate, water, resources and moreISO 14040 · ISO 14044Understanding where the product's impact lies and improving it; the basis for EPDs and carbon footprints
Carbon footprint of a product (CFP)Greenhouse gases only, in kg CO₂e per unitISO 14067 · GHG Protocol Product StandardClient requests for their Scope 3, product climate targets
EPDThe results of an LCA, reported under common rules and verified by a third partyISO 14025 · EN 15804Public tenders and CAM, construction, comparing products in the same category
PEF16 impact categories, with a harmonised European methodRecommendation (EU) 2021/2279Comparisons between products in the EU, Commission initiatives

Learn more about the EPD, its contents and its verification in our article on the environmental product declaration. For buildings the method is the LCA under EN 15978, covered in our article on building LCA.

Who asks for the environmental footprint of products

Until a few years ago LCA was a topic for large groups and research departments. Today the requests reach SMEs too, from four directions.

  • Clients and lead companies. To calculate their Scope 3, purchased goods in particular, large companies ask suppliers for the carbon footprint of their products instead of industry averages. We cover this in our guide to Scope 3.
  • Public tenders. Italy's Minimum Environmental Criteria (CAM), mandatory in public procurement, ask for specific means of proof and in several cases accept or reward an EPD. Find out which in our article on CAM certifications.
  • New EU rules. Regulation (EU) 2024/1781 on ecodesign (ESPR) introduces the digital product passport and sets environmental requirements and information product group by product group. Among the first groups named by the Commission are textiles, furniture, tyres and mattresses, as well as steel and aluminium.
  • Environmental claims. From 27 September 2026 generic environmental claims are banned and every claim must be substantiated. Writing that a product «cuts emissions» without data is a risk: see the free greenwashing check.

What data you need to get started

The good news is that much of the data already exists, spread across engineering, production, purchasing and logistics. For a first assessment you mainly need the following.

  • Bill of materials. Materials, components and weights per unit of product.
  • Purchasing. Suppliers, origin of raw materials and any environmental data already received.
  • Plant. Energy, gas and water use, with a criterion for allocating it across products.
  • Waste and packaging. Quantities, materials and destination.
  • Logistics. Inbound and outbound transport: vehicles, distances, loads.

There is a distinction between primary data, measured in the company, and secondary data, taken from recognised databases when primary data is not available. The more primary data there is, the more the result describes your product rather than an average one.

The most common mistakes

  • Starting without a goal. A footprint for a client, an EPD for a tender and a study to improve the product call for different choices.
  • Wrong boundaries. A «cradle to gate» study does not answer a request for the whole life cycle.
  • Comparing figures that are not comparable. Results obtained with different methods, functional units or databases cannot be compared.
  • Using the figure for a generic claim. A calculated footprint does not entitle you to write «sustainable product»: learn how to avoid greenwashing.
The key point

An LCA measures a product's impacts across its whole life cycle; the carbon footprint covers greenhouse gases only; an EPD reports the results with independent verification. Clients, tenders and EU rules ask for them more and more often. Before you start, clarify who is asking, for what and with which boundaries: method, data and timing depend on that.

Where to start: a free call

Has a client asked for the footprint of your products, does a tender require an EPD, or do you want to get ready before it happens? The first step is understanding what you really need. In a free call with an Envify expert we review the request, the data you already have and the steps to take. Book the free call.

Frequently asked questions

What is a product LCA?
An LCA, or life cycle assessment, is the method that measures the environmental impacts of a product across every stage of its life, from the extraction of raw materials to end of life. It follows ISO 14040 and ISO 14044 and covers several impact categories, such as climate change, water and resource use.
What is the difference between an LCA and a product carbon footprint?
An LCA covers all the environmental impacts of the product. The carbon footprint of a product, governed by ISO 14067, covers greenhouse gases only and is expressed in kg CO₂e per unit of product. In practice it is an LCA limited to the climate change category.
What is the difference between an LCA and an EPD?
The LCA is the study; the EPD is the document that reports its results under common rules for the product category (PCR), after verification by an independent body. An EPD is always based on an LCA, but not every LCA becomes an EPD.
Is a product LCA mandatory?
Not in general. It becomes necessary when a client asks for it, when a tender requires or rewards an EPD, when an EU regulation sets environmental information for a product group, or when you want to substantiate an environmental claim about the product.
What data do I need to get started?
Almost always the bill of materials with materials and weights, suppliers and the origin of raw materials, the plant's energy use, waste, packaging and transport. For use and end of life you start from typical scenarios for the product.

Sources and further reading

Have you been asked about the impact of your products?

Let's talk in a free call with no commitment: together we work out where to start.

Book the free call